""" 配置管理API """ from fastapi import APIRouter, HTTPException from api.models.config import ConfigItem, ConfigUpdate import sys from pathlib import Path import logging # 添加项目根目录到路径 project_root = Path(__file__).parent.parent.parent.parent sys.path.insert(0, str(project_root)) sys.path.insert(0, str(project_root / 'backend')) sys.path.insert(0, str(project_root / 'trading_system')) from database.models import TradingConfig logger = logging.getLogger(__name__) router = APIRouter() @router.get("") @router.get("/") async def get_all_configs(): """获取所有配置""" try: configs = TradingConfig.get_all() result = {} for config in configs: result[config['config_key']] = { 'value': TradingConfig._convert_value( config['config_value'], config['config_type'] ), 'type': config['config_type'], 'category': config['category'], 'description': config['description'] } return result except Exception as e: raise HTTPException(status_code=500, detail=str(e)) @router.get("/feasibility-check") async def check_config_feasibility(): """ 检查配置可行性，基于当前账户余额和杠杆倍数计算可行的配置建议 """ try: # 获取账户余额 try: from api.routes.account import get_realtime_account_data account_data = await get_realtime_account_data() available_balance = account_data.get('available_balance', 0) total_balance = account_data.get('total_balance', 0) except Exception as e: logger.warning(f"获取账户余额失败: {e}，使用默认值") available_balance = 0 total_balance = 0 if available_balance <= 0: return { "feasible": False, "error": "无法获取账户余额，请检查API配置", "suggestions": [] } # 获取当前配置 min_margin_usdt = TradingConfig.get_value('MIN_MARGIN_USDT', 5.0) min_position_percent = TradingConfig.get_value('MIN_POSITION_PERCENT', 0.02) max_position_percent = TradingConfig.get_value('MAX_POSITION_PERCENT', 0.08) base_leverage = TradingConfig.get_value('LEVERAGE', 10) max_leverage = TradingConfig.get_value('MAX_LEVERAGE', 15) use_dynamic_leverage = TradingConfig.get_value('USE_DYNAMIC_LEVERAGE', True) # 检查所有可能的杠杆倍数（考虑动态杠杆） leverage_to_check = [base_leverage] if use_dynamic_leverage and max_leverage > base_leverage: # 检查基础杠杆、最大杠杆，以及中间的关键值（如15x, 20x, 30x, 40x） leverage_to_check.append(max_leverage) # 添加常见的杠杆倍数 for lev in [15, 20, 25, 30, 40, 50]: if base_leverage < lev <= max_leverage and lev not in leverage_to_check: leverage_to_check.append(lev) leverage_to_check = sorted(set(leverage_to_check)) # 检查每个杠杆倍数下的可行性 leverage_results = [] all_feasible = True worst_case_leverage = None worst_case_margin = None for leverage in leverage_to_check: # 计算最小保证金要求对应的最小仓位价值 required_position_value = min_margin_usdt * leverage required_position_percent = required_position_value / available_balance if available_balance > 0 else 0 # 计算使用最小仓位百分比时，实际能得到的保证金 min_position_value = available_balance * min_position_percent actual_min_margin = min_position_value / leverage if leverage > 0 else min_position_value # 检查是否可行： # 1. 需要的仓位百分比不能超过最大允许的仓位百分比 # 2. 使用最小仓位百分比时，实际保证金必须 >= 最小保证金要求 condition1_ok = required_position_percent <= max_position_percent condition2_ok = actual_min_margin >= min_margin_usdt is_feasible_at_leverage = condition1_ok and condition2_ok leverage_results.append({ 'leverage': leverage, 'required_position_value': required_position_value, 'required_position_percent': required_position_percent * 100, 'actual_min_margin': actual_min_margin, 'feasible': is_feasible_at_leverage, 'condition1_ok': condition1_ok, 'condition2_ok': condition2_ok }) if not is_feasible_at_leverage: all_feasible = False # 记录最坏情况（实际保证金最小的） if worst_case_margin is None or actual_min_margin < worst_case_margin: worst_case_leverage = leverage worst_case_margin = actual_min_margin # 使用基础杠杆的结果作为主要判断 base_result = next((r for r in leverage_results if r['leverage'] == base_leverage), leverage_results[0]) is_feasible = all_feasible suggestions = [] if not is_feasible: # 不可行，给出建议 # 找出不可行的杠杆倍数 infeasible_leverages = [r for r in leverage_results if not r['feasible']] if infeasible_leverages: # 找出最坏情况（实际保证金最小的） worst = min(infeasible_leverages, key=lambda x: x['actual_min_margin']) worst_leverage = worst['leverage'] worst_margin = worst['actual_min_margin'] # 方案1：基于最坏情况（最大杠杆）降低最小保证金 if not worst['condition2_ok']: suggestions.append({ "type": "reduce_min_margin_to_supported", "title": f"降低最小保证金（考虑{worst_leverage}x杠杆）", "description": f"将 MIN_MARGIN_USDT 调整为 {worst_margin:.2f} USDT（当前: {min_margin_usdt:.2f} USDT）。在{worst_leverage}x杠杆下，实际只支持 {worst_margin:.2f} USDT", "config_key": "MIN_MARGIN_USDT", "suggested_value": round(worst_margin, 2), "reason": f"在{worst_leverage}x杠杆下，使用最小仓位 {min_position_percent*100:.1f}% 时，实际保证金只有 {worst_margin:.2f} USDT，无法满足 {min_margin_usdt:.2f} USDT 的要求" }) # 方案2：基于最大杠杆计算需要的最小保证金 max_leverage_result = next((r for r in leverage_results if r['leverage'] == max_leverage), None) if max_leverage_result and not max_leverage_result['feasible']: if max_leverage_result['required_position_percent'] > max_position_percent: suggested_min_margin_max_lev = (available_balance * max_position_percent) / max_leverage suggestions.append({ "type": "reduce_min_margin_for_max_leverage", "title": f"降低最小保证金（支持{max_leverage}x杠杆）", "description": f"将 MIN_MARGIN_USDT 调整为 {suggested_min_margin_max_lev:.2f} USDT（当前: {min_margin_usdt:.2f} USDT），以支持{max_leverage}x杠杆", "config_key": "MIN_MARGIN_USDT", "suggested_value": round(suggested_min_margin_max_lev, 2), "reason": f"在{max_leverage}x杠杆下，需要 {max_leverage_result['required_position_percent']:.1f}% 的仓位价值，但最大允许 {max_position_percent*100:.1f}%" }) # 方案3：降低最大杠杆 if use_dynamic_leverage: # 计算能支持的最大杠杆 max_supported_leverage = int((available_balance * max_position_percent) / min_margin_usdt) if max_supported_leverage < max_leverage and max_supported_leverage >= base_leverage: suggestions.append({ "type": "reduce_max_leverage", "title": "降低最大杠杆倍数", "description": f"将 MAX_LEVERAGE 调整为 {max_supported_leverage}x（当前: {max_leverage}x），以支持当前配置", "config_key": "MAX_LEVERAGE", "suggested_value": max_supported_leverage, "reason": f"当前配置下，最大只能支持 {max_supported_leverage}x 杠杆才能满足最小保证金要求" }) # 方案4：增加账户余额 if worst['required_position_percent'] > max_position_percent: required_balance = worst['required_position_value'] / max_position_percent suggestions.append({ "type": "increase_balance", "title": "增加账户余额", "description": f"将账户余额增加到至少 {required_balance:.2f} USDT（当前: {available_balance:.2f} USDT），以支持{worst_leverage}x杠杆", "config_key": None, "suggested_value": round(required_balance, 2), "reason": f"在{worst_leverage}x杠杆下，当前余额不足以满足最小保证金 {min_margin_usdt:.2f} USDT 的要求" }) # 显示所有杠杆倍数的检查结果 suggestions.append({ "type": "leverage_analysis", "title": "各杠杆倍数检查结果", "description": "详细检查结果见下方", "config_key": None, "suggested_value": None, "reason": None, "leverage_results": leverage_results }) else: # 可行，显示当前配置信息 actual_min_position_value = available_balance * min_position_percent actual_min_margin = base_result['actual_min_margin'] suggestions.append({ "type": "info", "title": "配置可行", "description": f"当前配置可以正常下单。最小仓位价值: {actual_min_position_value:.2f} USDT，对应保证金: {actual_min_margin:.2f} USDT（{base_leverage}x杠杆）", "config_key": None, "suggested_value": None, "reason": None }) # 如果启用了动态杠杆，显示所有杠杆倍数的检查结果 if use_dynamic_leverage and len(leverage_to_check) > 1: suggestions.append({ "type": "leverage_analysis", "title": "各杠杆倍数检查结果（全部可行）", "description": "详细检查结果见下方", "config_key": None, "suggested_value": None, "reason": None, "leverage_results": leverage_results }) return { "feasible": is_feasible, "account_balance": available_balance, "base_leverage": base_leverage, "max_leverage": max_leverage, "use_dynamic_leverage": use_dynamic_leverage, "current_config": { "min_margin_usdt": min_margin_usdt, "min_position_percent": min_position_percent, "max_position_percent": max_position_percent }, "calculated_values": { "required_position_value": base_result['required_position_value'], "required_position_percent": base_result['required_position_percent'], "max_allowed_position_percent": max_position_percent * 100, "min_position_value": available_balance * min_position_percent, "actual_min_margin": base_result['actual_min_margin'], "min_position_percent": min_position_percent * 100 }, "leverage_analysis": { "leverages_checked": leverage_to_check, "all_feasible": all_feasible, "results": leverage_results }, "suggestions": suggestions } except Exception as e: logger.error(f"检查配置可行性失败: {e}", exc_info=True) raise HTTPException(status_code=500, detail=f"检查配置可行性失败: {str(e)}") @router.get("/{key}") async def get_config(key: str): """获取单个配置""" try: config = TradingConfig.get(key) if not config: raise HTTPException(status_code=404, detail="Config not found") return { 'key': config['config_key'], 'value': TradingConfig._convert_value( config['config_value'], config['config_type'] ), 'type': config['config_type'], 'category': config['category'], 'description': config['description'] } except HTTPException: raise except Exception as e: raise HTTPException(status_code=500, detail=str(e)) @router.put("/{key}") async def update_config(key: str, item: ConfigUpdate): """更新配置""" try: # 获取现有配置以确定类型和分类 existing = TradingConfig.get(key) if not existing: raise HTTPException(status_code=404, detail="Config not found") config_type = item.type or existing['config_type'] category = item.category or existing['category'] description = item.description or existing['description'] # 验证配置值 if config_type == 'number': try: float(item.value) except (ValueError, TypeError): raise HTTPException(status_code=400, detail=f"Invalid number value for {key}") elif config_type == 'boolean': if not isinstance(item.value, bool): # 尝试转换 if isinstance(item.value, str): item.value = item.value.lower() in ('true', '1', 'yes', 'on') else: item.value = bool(item.value) # 特殊验证：百分比配置应该在0-1之间 if 'PERCENT' in key and config_type == 'number': if not (0 <= float(item.value) <= 1): raise HTTPException( status_code=400, detail=f"{key} must be between 0 and 1 (0% to 100%)" ) # 更新配置 TradingConfig.set(key, item.value, config_type, category, description) # 清除配置缓存，确保立即生效 try: from config_manager import ConfigManager # 如果存在全局配置管理器实例，清除其缓存 import config_manager if hasattr(config_manager, '_config_manager') and config_manager._config_manager: config_manager._config_manager.reload() except Exception as e: logger.debug(f"清除配置缓存失败: {e}") return { "message": "配置已更新", "key": key, "value": item.value, "note": "交易系统将在下次扫描时自动使用新配置" } except HTTPException: raise except Exception as e: raise HTTPException(status_code=500, detail=str(e)) @router.post("/batch") async def update_configs_batch(configs: list[ConfigItem]): """批量更新配置""" try: updated_count = 0 errors = [] for item in configs: try: # 验证配置值 if item.type == 'number': try: float(item.value) except (ValueError, TypeError): errors.append(f"{item.key}: Invalid number value") continue # 特殊验证：百分比配置 if 'PERCENT' in item.key and item.type == 'number': if not (0 <= float(item.value) <= 1): errors.append(f"{item.key}: Must be between 0 and 1") continue TradingConfig.set( item.key, item.value, item.type, item.category, item.description ) updated_count += 1 except Exception as e: errors.append(f"{item.key}: {str(e)}") if errors: return { "message": f"部分配置更新成功: {updated_count}/{len(configs)}", "updated": updated_count, "errors": errors, "note": "交易系统将在下次扫描时自动使用新配置" } return { "message": f"成功更新 {updated_count} 个配置", "updated": updated_count, "note": "交易系统将在下次扫描时自动使用新配置" } except Exception as e: raise HTTPException(status_code=500, detail=str(e))